RS fabrications

Local Secondary School Teacher Amy, came to RS Fabrications with the standard exhaust on her Mini One, known as Billy, in a bad state. The original OEM silencer has problems with the mounting brackets that are welded to the skin of the silencer box. These tend to fail, partly due to the thin guage of the silencer [...]

Wrexham County Borough Council have taken delivery of their 2 RS Fabrications Floor Mounted Battery Recycling Collection Boxes. Finished in Pink, the official colour for battery recycling, the collection boxes were finished off with Wrexham Corporate Branding and the standard Welsh Battery Recycling emblem for identification. Russell & Sarah met Catherine Knight, Recycling Officer for [...]

Steve Smee was down at RS Fabrications to check the progress on his Ultima/Audi RS6 conversion, currently taking shape at the Banbury workshop. “It was good to meet with Russell & Shane again and see the progress on my Ultima” stated Steve, “these things take time to come together, and |I can’t wait to get it [...]

Local Company, Power Park Autos Ltd, have been working on this Porsche Boxster S and came to RS Fabrications to replace the standard rear silencer box. Darren got with Shane and they arrived at a dual silencer box arrangement, with Twin 3″ rolled in, slash cut tailpipes, similar to the smaller OEM tailpipes supplied on this Boxster S year/model. [...]

Raj, of NS Tuning, has been working with RS Fabrications on this big horsepower R32 Mk 4 Golf. The R32 has previously been down to RS to have all the charge pipes fabricated for the front mounted intercooler, Air inlet pipework  and 3″ Turbo stainless steel downpipe.   The centre section of the exhaust, also in 3″, along with the downpipe received Zircotec [...]

Local Drift Ace Mathew Pratt is having RS Fabrications build the chassis on his new S13.5 Nissan. A Full Cage was bent up with supported turret towers in Clubman 500 Tube and the body shell has been extensivly modified to bring it up to full Drift Spec. “I have know Shane & Russell a number of years [...]

RS Fabrications, in association with MRC Tuning, are performing a transplant on a Ultiima GTR. The Ultima, originally running a Chevrolet V8 with Porsche gearbox [mounted upside down], is having an Audi RS6 V8 twin turbo installed. “after the engine and gearbox were removed, we set the donor RS6 engine on the surface table and started [...]

Mrs V’s Coopers S was back in the workshop to have the “Phase 1″ Vecchio Engineering performance exhaust system fitted. The stainless steel system consisted of CNC 2 bolt flange mating to the original manifold & catalytic converter on the R53 Cooper S. The center section has a single silencer box with 2.25″ bore entering into a pressed 2 into [...]

David from Vision Moto came to RS Fabrications with his MV Augusta “Carbon” Brutale. Vision Moto supply a wide range of performance parts for MV & Ducati Super Bikes and David had put together a full Titanium Exhaust System on the immaculate Brutale, with a Carbon “short GP” Silencer and had no way of connecting the 2. [...]

The Recycling & Waste Management Exhibition took place at the NEC, Birmingham this week and RS Fabrications participated with a Stand exhibiting their Battery Recycling Collection Box. The show, over a 3 day period [15, 16 & 17th Sept] had many of the industries suppliers and this was a 1st for RS Fab. ” we displayed [...]