RS fabrications

Ellis Harvey was at RS Fabrications workshop to take delivery of his Honda CR 85. Having been totally rebuilt the CR 85 has been prepped to the highest standard. ” Ellis came down to the workshop to get fitted to the Honda. Having grown at least 150mm  since the start of the 2009 Season, the [...]

Lotus F1 commissioned CES Europe & RS Fabrications to manufacture their pit equipment for the upcoming Formula 1 Season. Grid Trolley’s, as in the adjacent picture, have been manufactured for the Lotus team and are currently being shipped all over the globe. With increasing Air Freight charges, the modern f1 team has to Sea Freight their duplicated pit equipment. This [...]

Local Businessman Damian wanted to get an RS Fabrications Exhaust fabricated and fitted under his Porsche 997 Cabriolet. Damian, a repeat customer at RS, asked Shane what would be the best configuration for the 997. “Let me have a look and see how much space we have at the back, and I’ll tell you what I [...]

Ellis Harvey is in the news again. In only his 1st season, RS Factory Motocross Rider Ellis Harvey has finish a credable 11th in the Schoolboy Summer Championship 2009, run in conjuction with the Off Road Promotors Association.. Riding for Banbury MotorcrossClub, in the 85cc Small Wheel division, Ellis manhandled his Honda CR 85 to [...]

Ellis Harvey has taken up the Tig Torch at the RS Fabrications facility. Santa, dropped off a “Joker” welding helmet [via Russell & Sarah] at Christmas and now Ellis is under training by his Dad down a RS Fabrications. As we all know, Shane, known as “The Terminator”  in some parts!, is the best welder [...]

Neil Freestone, Designer for Fastcar Magazine, has been painstakingly developing his Clio 172 Sport over the past 3 years into a Fast Road/Trackday Projectile! It started with changes  to suspension [via coilovers], Image wheels, rubber, roll cage, bucket seats, but he still keeps some creature comforts, as it is still his daily runner!! Neil has set his standards high and [...]

“Recevez la puissance” the french call it. At RS Fabrications we say:- ” Get The Power!!” Michael Larwood contacted RS Fabrications and expressed to Russell & Shane how disappointed he was with his Clio V6 standard exhaust system and the lack of  performance after market systems available for his V6 projectile!! RS booked the Clio in, and [...]

Local Towcester Corvette Nutcase, Dennis Bailey, came to RS Fabrications to have titanium bypass tubes installed across the rear silencers on his imaculate Corvette. A common modification for Vette Tweekers, which involves welding in a bypass tube so that a path is opened up across the rear titanium silencer boxes. First thing was to make the Titanium tube. This was [...]

Mrs V’s Cooper S was back on the Btec Dyno for some power runs with the latest version of the performance exhaust developed with Vecchio Engineering. This final version in the Research & Development of the Mini Cooper S cat back system, has resulted in a bore size increase from 2.25″ on the centre section [...]

Jim ‘Jimbo’ Williams was back at RS Fabrications this week to have more exhaust work done to his RS4. Sporting a white wrap with carbon roof , Jim wanted something a little different at the back of his his immaculate RS4 B7. Jimbo opted for a quad tailpipe set-up, with two different size exit pipes. 2 x 76.2 [...]