filed in News on Oct.31, 2009
Raj, of NS Tuning, has been working with RS Fabrications on this big horsepower R32 Mk 4 Golf. The R32 has previously been down to RS to have all the charge pipes fabricated for the front mounted intercooler, Air inlet pipework and 3″ Turbo stainless steel downpipe. The centre section of the exhaust, also in 3″, along with the downpipe received Zircotec [...]
filed in News on Oct.25, 2009
Local Drift Ace Mathew Pratt is having RS Fabrications build the chassis on his new S13.5 Nissan. A Full Cage was bent up with supported turret towers in Clubman 500 Tube and the body shell has been extensivly modified to bring it up to full Drift Spec. “I have know Shane & Russell a number of years [...]
filed in News on Oct.25, 2009
RS Fabrications, in association with MRC Tuning, are performing a transplant on a Ultiima GTR. The Ultima, originally running a Chevrolet V8 with Porsche gearbox [mounted upside down], is having an Audi RS6 V8 twin turbo installed. “after the engine and gearbox were removed, we set the donor RS6 engine on the surface table and started [...]
filed in News on Oct.25, 2009
Mrs V’s Coopers S was back in the workshop to have the “Phase 1″ Vecchio Engineering performance exhaust system fitted. The stainless steel system consisted of CNC 2 bolt flange mating to the original manifold & catalytic converter on the R53 Cooper S. The center section has a single silencer box with 2.25″ bore entering into a pressed 2 into [...]