Archive for February, 2009:

Ford RS 2000 Re-Built using RS Fabrications Body Spits

Local Banbury Paintsprayer “Goldie” has finished his Midnight Blue RS 2000. Goldie had RS Fabrications help with the restoration work on his Ford RS 2000. RS Fabrications Body Spits [currently manufactured for the MK 1 & 2 Escorts] were used to fabricate and re-weld sections of the shell that were completely gone, due to advanced corrosion. Phil “Loon Dog” […]






Tags:

Leave a Comment

Lost Healey Le Mans Racing Car rebuilt from pictures

Healey built a “one off” chassis to compete at Le Mans in the late 1950’s. No record or history is available for the vehicle, but regular Healey enthusiast John, has rebuilt the racing car from pictures that he has attained. Monocoque construction and using a rover V8 engine, John has painstakingly re-built the Lost Healey. Originally it was installed with a […]






Tags:

Leave a Comment

Racing Plus 8 Morgan Lightweight gets Full Rollcage

Additional front Rollcage section added to Morgan Plus 8 RPU 164R Phillip brought his Lightweight Morgan Plus 8 to RS Fabrications for the additional front rollcage section required by the MSA. RPU 164R is number 16 of only 19 Morgan Factory produced production Plus 8 Sports Lightweights. “Launched at the Earls Court Motorshow in 1975 […]






Tags:

Leave a Comment

Racing Driver & RS Fabricator Michael Moyers Finalises Plans

Racing Diver, and part time fabricator for RS Fabrications, finalises plans for his 2009 racing campain. As a talented fabricator for RS Fabrications, the Silverstone racer  has been testing various cars and is currently negotiating  to clinch a drive for this year. Featured in the Towcester Herald & Post Sport Section this week, he realises […]






Tags:

Leave a Comment

RS Fabrications open RS Racepaint

Rs racepaint is now up and running. Situated across the street from the main Fabrication & Preparation Workshop, the fully equipped Paintshop is set out with two Spraybake boothes and preparation area for three vehicle and associated bodywork components. Full prep & resprays of racing cars are a speciality and the majority of vehicles prepared in the RS […]






Tags:

Leave a Comment

Supercharged VW Beetle Polished 2.5 Inch S.S. Rollcage

John commissioned RS Fab to install a Custom polished Stainless Steel Rollcage in his immaculate Supercharged Beetle. With rear seats removed, templates were cut to mandrel bend the main hoop in 2.5″ dia  304 stainless steel tube. Loading plates were welded into the body shell and the main hoop, rear down tubes and a diagonal brace […]






Tags:

Leave a Comment

Audi RS4/S4 Twin Turbo Duel 3″ Exhaust System

Audi RS4 and S4 0wners can now fit the RS Fabrications full Twin 3.0″ Exhaust System to their vehicles. From a performance standpoint the 3.0″ Twin pipe system is a huge bonus for performance vehicles. Russell states ” we are the only exhaust manufacturer that  actually produce a twin 3 inch system for the twin turbo RS4/S4 Audi application. The […]






Tags:

Leave a Comment

VW Camper Split Screen Low Boy Exhaust

Local VW Camper Split Screen Nutcase Darren, came to RS Fab to have a Custom Exhaust fabricated and fitted under his Low Boy, Rat Splitty. Fabricated in 2.5″ 304 S.S. with a 16″ Oval Silencer Box, the Tig Welded Exhaust was mounted up under the rear of the van. The bumper was cut away to connect the performance headers […]






Tags:

Leave a Comment

Audi RS4 V6 Turbo Water/Methonol Injection Tank

RS Fabrications now manufacture a Aluminium Water/Methonol Injectioin Tank for the Audi RS4. Fabricated in NS4 aluminium and developed in conjunction with MRC Tuning & D-tec Performance Engineering, the Black Anodised Tank is fabricated to fit adjacent to the factory tool kit, located in the Spare Wheel Well of the Audi RS4. It is currently used by MRC […]






Tags:

Leave a Comment

RS Fabrications Expansion April 2009

RS Fabrications will be doubling their workshop area in April2009.  Moving into the adjacent 2500 sq/ft unit, RS Fabrications will be maintaining their current location in Thorpe House , Thorpe Way, Banbury. The new manufacturing facility, on the corner of  Thorpe way & Thorpe Drive, will give added access via a double shutter doors, increase […]






Tags:

Leave a Comment